ZNC-P26
● Simple Operating
Easy set up and operating, just need to input electrode material, size of electrode and expected working depth, controller will create the necessary parameters.
● Superior Machining Function
Can machining in large surface and deep processing with two section servo feed speeds enable supreme machining and maintain machining accuracy. Controller offers micro computer monitoring. When in arcing condition, control automatic adjusting T-off and clean-up arced area.
● Rigid Construction
Rigid structure and the table surface is heat treated for high rigidity, make sure is long wear resistance.
Easy set up and operating, just need to input electrode material, size of electrode and expected working depth, controller will create the necessary parameters.
● Superior Machining Function
Can machining in large surface and deep processing with two section servo feed speeds enable supreme machining and maintain machining accuracy. Controller offers micro computer monitoring. When in arcing condition, control automatic adjusting T-off and clean-up arced area.
● Rigid Construction
Rigid structure and the table surface is heat treated for high rigidity, make sure is long wear resistance.
| Item | Unit | P26 | |
| X/Y/Z Travel | mm | 300 × 250 × 150 | |
| U Travel | mm | 150 | |
| Work Table Size(L×W) | mm | 600 × 300 | |
|
Max.
Work Piece Dimension(L×W×H)-Flush |
mm | 750 × 500 × 240 | |
|
Max.
Work Piece Dimension(L×W×H)-Submerge |
mm | 750 × 500 × 180 | |
| Max. Work Piece Weight | kg | 800 | |
| Max. Electrode Weight | kg | 100 | |
|
Distance
From Work Table To Electrode Plate |
mm | 190-490 | |
| Max. Machining Current | Amp | 30 | |
| Power Input | KVA | 3 | |
| Max. Dielectric Level | mm | 190 | |
| Dielectric Unit Capacity | Liter | 250 | |
| Fliter | pcs | 2 | |
| Machine Net Weight | kg | 1700 | |
| Machine Dimension | mm | 1750 × 2550 × 2450 | |
